ResMed - AirSense 10 Elite - CPAP
CPAP AIRSENSE 10 ELITE by ResMed is the only one CPAP equipped with the AutoRamp™ feature, which allows the device to replace the doctor in therapy control. It is also equipped with a patient's GSM automatic monitoring system, which communicates with the single software AirView ResMed™ to have a perfect check of the patient constantly updated and allows the possibility to send the data of the therapy to the treating physician.
The AutoRamp™ mode with the sleep detection principle is activated automatically providing a low pressure during the step of pre-sleep for greater comfort, gradually increasing the pressure until reaching the prescribed therapy from the time when the patient falls asleep.
The level of illumination of the screen adapts to the brightness of the room. Therefore, if the user needs to get up during the night, the screen backlight will not mind a possible partner. In addition, after a period of time, the monitor turns off completely in order not to disturb your sleep.
Caution: the package does NOT include the humidifier.
Available functions in the Elite model:
- CPAP function
- AutoRamp™ with sleep onset detection
- Humid Air advanced technology (only if there is a humidifier)
- Advanced automatic temperature control (only if there is a humidifier)
- SmartStart
- Integrated wireless connectivity
When simplicity meets innovation.
Equipped with an integrated remote assistance system, AIRSENSE 10 Elite redefines sleep therapy. With a sleek new design and a host of new features designed for maximum comfort, the AIRSENSE 10 Elite device provides a new concept of treatment with positive airway pressure (Continuous Positive Airway Pressure, CPAP) for patients suffering from obstructive sleep apnea.
It equipped with data transmission-reception technology wirelessly on the GSM network.
Automatic calculation of intentional losses on exhalation mask with holes interface selection from the settings menu.
Operating pressures from 4 to 20 cmH2O
It is adapted to all types of vented masks and to all the circuits by 22 mm.
The package includes the device, a circuit and carrying bag.
What is included in the basic package:
- Device
- Carrying case
- Non heated tube
- Power supply
- Power cord
- GSM module
- User manual
- SD card holder
- SD card
What is NOT included, but must be purchased as an accessory:
- Humidifier
- Replacement filters
- Heated tube
- Clinical manual
- Alternative solutions for power supply
Features:
- Operating modes: CPAP
- Selection of interfaces: Mask Type
- Ventilation Type: Non Invasive
- Operating pressures: 4 to 20 cmH2O
- Manually adjust ramp time to achieve the therapeutic pressure
- Automatic ramp time setting with the patient falling asleep detection
- Automatic altitude compensation
- Color LCD display for direct visualization of the following parameters:
- Settings
- Mode in use
- Pressures provided
- Loss in liters/minute
- Apnea/Hypopnea index
- Apnea Index
- Efficacy data and usage data
- SpO2 and heart rate (with optional module)
- Patient menu (basic and advanced)
- Options
- Reminder programming for the patient at repeated intervals, 1 to 24 months (replacement mask - filter change - call doctor - inserting memory card - Technical call - customizable reminder).
- Internal memory of 365 sessions that can be viewed on the device, ResScan™ and wirelessly via AirView™ and 30 sessions of detailed data at high resolution can be displayed on the computer through the dedicated ResScan™ software with patient record management, follow-up, programming control visits, etc.
- Smart Start™ function pauses/resumes therapy when it detects the disconnection/connection of the mask from the patient's face
- optional integrated heated humidification system and Humid Air™ with Climate Control™ for control (automatic or manual) of temperature and humidification levels. patient circuit optional Climate Lineair™, heated and equipped with temperature sensors for dispensing in automatic 85% relative humidity. An anti-fog protection system, even at very high levels of humidification.
- 110/220 Volt power supply with the possibility (optional) to use with power supply 12/24 Volt
- Optional external battery ResMed Power Station II™.
- Equipment complies with international IEC 601.1, class II type CF, made in compliance with the EU Directive 93/42 / EEC (CE).
- Emission level 27 dBA sound, pressure level at 1 meter 13dBA
- Dimensions in mm: Height 116 - Width 255 - Depth 150 (with HumidAir)
- Environmental conditions: operating temperature between +5 and + 40° C - Operating humidity 15-95% non-condensing - Storage and transport temperature of -20 to + 60° C - Storage and transport humidity up to 95% non-condensing
- Provided of bag for the transport of equipment and accessories.
